VX720LG 4K HDR10 UHD PTZ Camera, 50MP 1/1.55" sensor, 20x optical, 12G-SDI

When the room only gets one shot at the moment, the VX720LG makes sure it is the right one. Built on a large 1/1.55-inch 50-megapixel sensor and a 20x optical zoom, this next-generation Pro AV PTZ camera resolves every face, slide and gesture in true 4K60 — then frames it automatically with proprietary ReID and FaceID tracking that locks onto the speaker by body shape, posture and clothing, even in a busy scene. HDR10 with 10-bit colour and the BT.2020 wide gamut renders skin tones and high-contrast stage lighting the way the eye actually sees them, while 1080p120 high-frame-rate capture keeps fast motion crisp for sports and live production. The 'G' variant adds a 12G-SDI output alongside HDMI 2.0, 3G-SDI, USB-C and 1000Mbps IP, so a single camera feeds your switcher, your codec and your stream at once. PDAF snaps focus in an instant, dual tally lights tell talent and crew exactly which camera is live, and a built-in ND/CPL filter mount tames overexposure and reflections with one touch. NDI 6, RTMP, SRT, ONVIF and full VISCA/Pelco control over RS-422/RS-485 or IP drop it straight into broadcast, lecture-capture, house-of-worship and command-and-control workflows.

Features

• Cinematic 4K clarity: a large 1/1.55-inch 50MP CMOS sensor with 20x optical zoom (16x digital) captures fine detail from wide room to tight close-up
• Frames the speaker for you: proprietary ReID + FaceID AI tracking follows subjects by skeleton, body shape, posture and clothing and keeps them centred
• True-to-life colour: HDR10 with 10-bit depth and BT.2020 wide gamut doubles the colour range of BT.709 for natural skin tones under hard stage light
• Feeds every destination at once: simultaneous 12G-SDI (G variant), HDMI 2.0, 3G-SDI, USB-C and 1000Mbps IP outputs drive switcher, codec and stream together
• Smooth fast motion: 1080p120 high-frame-rate output is built for live sports and action, with PDAF phase-detection autofocus for instant, accurate focus
• Clear live status: front and rear tally lights show on-air state at a glance to both talent and crew
• One-touch light control: built-in filter mount accepts ND and CPL filters to cut overexposure and reflections without extra rigging
• Drops into any workflow: NDI 6, RTSP, RTMP, SRT, ONVIF and multicast streaming with VISCA / Pelco-D / Pelco-P control over RS-422, RS-485, IP or USB
• Flexible install: 255 presets at 0.1-degree accuracy, PoE+ single-cable power and a 0.5 lux low-light rating for real-world rooms and stages