iTrans W100 HDMI 1080P Wireless Extenders (Tx and Rx), w/ One-way IR, 100m

The Infobit iTrans W100 is a wireless Full-HD HDMI extender kit that sends a 1080p source to a remote display with no cable run between the two ends - useful where pulling HDMI or Cat cable is impractical. The transmitter takes one HDMI input and streams it over a dedicated wireless link up to 100 m (330 ft) in open, interference-free environments, while the receiver outputs 1080p60 to the display. An H.265 (HEVC) codec keeps end-to-end latency under 120 ms, and YCbCr 4:4:4 colour preserves full image quality. One-way IR pass-back lets a presenter control the source from the display side. HDMI 1.3 / HDCP 1.4 / DVI 1.0 compliant, supplied as a matched Tx + Rx pair in compact 76 x 98 x 21 mm housings, the W100 is a quick, low-power answer for signage, meeting-room and display deployments where wiring is the obstacle.

Features

• Transmits one 1080p HDMI source to a display wirelessly - up to 100 m (330 ft) line-of-sight, no cabling between ends
• 1920x1080@60Hz YCbCr 4:4:4 in and out - full HD with no chroma subsampling loss
• H.265 (HEVC) codec with end-to-end latency under 120 ms
• One-way IR pass-back: control the source from the display end
• HDMI 1.3, HDCP 1.4 and DVI 1.0 compliant
• Sold as a complete kit - transmitter (Tx) and receiver (Rx) in the box
• Compact 76 x 98 x 21 mm units (100 g each) for discreet, flexible install
• Low power: 5.6 W (Tx) / 2.65 W (Rx); universal AC 100-240V adapters (DC 5V/2A)