iTrans USB3-TR100-R USB 3.0 per HDBaseT 3.0 plėstuvą, 5 Gbps per CAT6a iki 100 m – imtuvas (įrenginio pusėje)

Put the room's USB camera, mic and speakerphone up to 100 m from the host and still get full USB 3 speed. This is the receiver (device side) of the Infobit USB3-TR100 USB extender - a plug-and-play, driver-free point-to-point link that carries a USB 3.2 Gen 1 (5 Gbps) signal over a single CAT6a cable with bi-directional 24V Power-over-Cable, so a huddle-room or lecture-hall PC can sit in the rack while the peripherals stay at the table or wall. RS-232 and FSYNC GPIO pass-through and API control make it integration-friendly.

Features

• • Receiver (device side) unit of a USB 3.2 Gen 1 (5 Gbps) point-to-point extender over a single CAT6a cable
• • Up to 100 m / 328 ft extension; bi-directional 24V Power-over-Cable
• • RX: 4x USB-A device; HDBT RJ45 input (24V PoC); RS-232; FSYNC GPIO. USB-A power 2x 5V/1.5A + 2x 5V/1A
• • Plug-and-play, no drivers; RS-232 and FSYNC GPIO pass-through with API control
• • Interoperable across the iTrans U3-TR100CB / U3-WP100TR / USB3-TR100 range
• • USB 3.0 over HDBaseT 3.0 (10G network bandwidth)